Four days later, Sato's house was forged.

The smelting furnace in the forging room has not been extinguished for four days!

The villagers of Konoha Ninja Village were also amazed at this. Since the accident between the Sato family half a year ago, the forging house of the Sato family has not been opened for a long time. Many villagers feel that they will not have the chance to see the Sato family's "Fire Fire Secret Realm" landscape within at least ten years. However, they did not expect that just half a year later, Konoha will appear again in the "Fire Fire Secret Realm"!

According to the news from the Anbu, the reason why the "Fire Secret Realm" reappeared was because the last person from the Sato family, Sato was helpless and wanted to forge a ninja knife for Konoha's Anbu!

As soon as the news came out, the villagers questioned the authenticity. As we all know, the members of the Sato family would start practicing forging after their birthday when they were seven years old. Sato's son is only nine years old this year and has only two years of forging experience. Now he is just forging an apprentice.

A primary school apprentice went to forge ninja swords for the elites of Anbu? This is as ridiculous as a primary school student giving lectures to university professors.

However, all kinds of gossip and official news have verified the authenticity of this news. Elementary school students... Oh no, forging apprentices, they really have to forge ninja swords for the Anbu elites.

The fire was burning in the smelting furnace in the forging room. Sandrama stood in front of the furnace with his shirtless eyes, staring at the incandescent sword embryo.

At this time, the sword embryo was smelting in a smelting furnace of more than 800 degrees.

As Sanzuo has always said, alchemy and forging are extremely good in nature. Under the extremely terrifying decomposition and reorganization of alchemy, all impurities in the steel can be directly removed in one step.

Of course, the mourning master did not remove all the impurities, leaving behind some impurities, such as carbon, which is beneficial to the blade. Just as not all bacteria are harmful to the human body, for forging, some impurities in the sword embryo can make the formed sword stronger.

If the forged weapon is doped with carbon, it will give the weapon the characteristic of "shock absorption". A weapon with "shock absorption" can withstand greater strength when resisting attacks than a weapon without "shock absorption" characteristic.

"It's almost ready to quench."

The mourning assistant roughly estimated the temperature change and prepared for quenching.

In fact, the quenching step can also be replaced by alchemy, but the mourning always feels that some steps in forging cannot be skipped, such as mud quenching and grinding. When we forged the "Canglong" before, we didn't have time to perform these steps. Now we have plenty of time, so the mourning step is naturally ready to do all the next few steps.

The feeling of accomplishment after quenching and polishing by yourself is something that cannot be felt by alchemy directly in one step.

Of course, there are some little thoughts about helping me. After all, the process of forging weapons is also an excellent way to practice body-forging techniques.

Why not practice forging and body-building at the same time?

"The forging of 'Shi Yu' is finally coming to an end."

The mourning assistant looked at the three neatly discharged rows of "Shi Yu" on the side. Including the "Shi Yu" that had not been quenched in the furnace, a total of thirty pieces were considered to meet the standards and complete the main task G, and the time it took was shorter than expected.

However, these thirty forgings of "Shiyu" are completely imitated by the "Shiyu" provided by Sarutobi Hinashin. Compared with the genuine "Shiyu", the Forgings of Shizui forged has no other advantages except for the strength and weight of the blade.

When Sato Toshisaki forged ‘Shiyu’, he had already brought the ordinary materials used for forging to the extreme.

If it weren't for the almost bug-like alchemy of Sansuke, the "Shiyu" forged by his second-rate forging technique would probably not be as good as half of Sato Shisaki.

Thirty "Shiyu" are about to be completed, but Morisu did not want to hand over these thirty "Shiyu" to Sarutobi Hinata.

After all, what he asked Meng Chuan to say was that thirty imitations of "Shi Yu" plus five weapons that are not inferior to "Shi Yu". In addition to "Shi Yu", five weapons that are different from "Shi Yu" but are not inferior to "Shi Yu".

Compared with the "Shi Yu" that has already been exerted to the extreme and cannot be improved, Sanzuo is very confident about the five weapons he has conceived. These five weapons will definitely not be inferior to the ninja knife "Shi Yu"!

"The key to getting the evaluation S is on these five weapons!"

Looking at the five unique and completely different "sword embryos" in front of him, Sanzuo smiled with satisfaction.

This time, he pressed all the treasures on these five weapons.

***************

Naruto Office.

Sarutobi Hinako looked at the report in her hand with a serious face, looking at her full concentration, and in front of him was the unkind Shimura Danzo.

"Saruto, although you are Naruto, you must give me an explanation for this matter."

Danzo's voice sounded very annoyed, "It was my people who collected the intelligence, it was my people who snatched the chakra steel, and it was my people who brought the chakra steel back."

"And you are fine, you don't have to do anything, just pick the fruit?"

"When I was not here, I ordered the chakragang to take it to Sato's house? What does this mean?" Danzo looked at Sarutobi Hinako coldly, all of his dissatisfaction in his tone.

It’s also a pity that the one who did this was Sarutobi Hinazen. If it were someone else who did this, Danzo would have ordered the ninjas of the "Ken" tribe to capture him and execute him, and to seize food from the tiger's mouth. Isn’t this seeking death?

However, if Danzo is a tiger, then Sarutobi is a Vajra who can equally match the tiger in terms of strength!

"You were not here before, so I ordered it without discussing with you." Sarutobi Hiruzen gave up on his continued reading of the report and pretended to be ignorant. He put down the report in his hand. "I know my decision was a bit hasty, but if you were on the scene at the time, you would have made the same decision as me."

"Mr. Naruto San's Day." Shimura Danzo said in a stiff tone, "I hope you can distinguish between public and private affairs and not bring personal relationships and personal emotions into your work, as this is unfair to other people and other families."

"Danzang, believe in my judgment."

Sarutobi Hinazawa picked up the gun and took a sip of cigarettes, "I admit that Sato Toshisaki is my friend, and I am treated as a son as a mourning son, but this alone cannot let me give him rare materials such as chakra steel."

"It was the sword that I decided to hand over the materials to the mourning assistant."

"This is..."

Danzo looked along Sarutobi Hinako's gaze and was placed under the filing cabinet with a light blue dragon-patterned sword. He was naturally familiar with this sword. In the past, Danzo often entered and exited the Sato family for the weapons and equipment of "Root".

"Did the little devil of the Sato family exchange chakra steel for 'Canglong'?"

Danzo's expression was slightly slower. It would not be too much of a loss if he exchanged chakra steel for the Sato clan's magic sword "Aolong".

Sarutobi Hinashin shook his head, "This 'Aolong' is fake, it is a counterfeit forged by Sansuke himself. However, the details of this counterfeit are completely consistent with the authentic ones except for the weight."

"Impossible! He can't have such superb forging skills!" Danzo retorted without thinking.

He picked up the imitation "Aolong". It was indeed as Sarutobi Hinasaruto said. The weight of this imitation is about ten times that of the genuine "Aolong", and the details in other places are exactly the same as the genuine one.

"I reacted the same way as you at that time, but the facts are in front of you..."

"No, this cannot be forged by him." Danzo lightly tapped the sword body of the long sword in his hand and retorted.

"Even Sato Toshisaki doesn't have this forging technique."

Danzo kept the rhythm and hit the sword body of the 'Aolong' in his hand. The sound of each time he hit me like the sound of a bell in the ancient temple. "This sword body is not the forging technique of the Sato family at all. If it were a weapon forged by 'Hard and Hammer', the sound of hitting the sword body would not be like this."

Sarutobi Hinashin was stunned, but he didn't expect this.

As one of the forges of the "Canglong", Sarutobi knew very well that the "Canglong" sword body was smelted through "thousand hammers and smelting". After the "thousand hammers and smelting", the "dragon pattern" unique to the Sato family forging will appear on the sword after quenching.

Although this fake "Canglong" also has "dragon pattern", the sound of the striking Duanzang is not the sound that "dragon pattern" has. The sound of "dragon pattern" should be crisp and whispering like a dragon.

"It's not a good judgment based on this point alone, right?" Sarutobi Hinata still trusted the helpless in his heart. However, the next words from Shimura Danzo waved his trust in the helpless.

"According to the information from the 'Ren's' department, the smelting furnace in the forging room has not been used for half a year since the genocide extermination incident half a year ago." Danzo held Kuma in one hand and began to hit the hilt of the fake 'Aolong'. "If you haven't even used the smelting furnace, what method did Sato use to forge this imitation?"

"This forging method is not the style of the Sato family."

"Appoint it, Sarutobi." Danzo put down the sword and Khuna in his hand, "It's time for me to visit the new patriarch of the Sato family."

"I really want to hear how he will explain this."
Chapter completed!