This technology is only available in some large vehicle manufacturers.

Like some slightly smaller agricultural machinery factories and tractor factories, they either use manual paint.

Either use a very simple air compressor to spray paint the car.

Their model that relies solely on manual and hand-operated means that the paint sprayed is uneven in thickness and has a low finish.

It’s not because they can’t make the paint surface smooth, smooth and reflective.

But if you want to reach the level of uniform and brightness of the furniture factory.

It requires careful polishing by skilled workers, purely hand-made, observation with the naked eye, and touching with hands.

Then, through a little or a little repeated spraying, the painting effect of Tianjing Fashion Furniture Factory can be achieved.

After doing so, I will do it.

It is OK to get a small batch of customized products, but it cannot achieve large-scale production.

The painting equipment of Tianjing Shixing Furniture Factory is a complete set of data obtained after repeated experiments and adjustments to countless spray heads.

The furniture factory didn't know how much paint was wasted just in terms of experimenting with the thickness and uniformity of the paint.

It can be said that every fine-tuning in the experiment is a lot of money.

In this regard, it is equivalent to the research and development of new materials technology. It can only go through countless experiments and repeated experiments.

Only by solidifying a complete set of data.

For example, when the room temperature is 20 degrees, what should the flow rate of the blue paint spray head per second?

Different brands of paint have different microparticles inside them.

So what can we achieve the best formula?

How much should the other colored nozzles matched with it, their respective flow velocities and pressures should be achieved?

When the room temperature of the painting workshop reaches 30 degrees, what should the pressure required for each nozzle be?

How much should the flow rate of paint reach?

If in winter, the room temperature of the spray painting workshop becomes minus 15 degrees Celsius, the paint will become more viscous at this time.

When this happens, how should we adjust the flow rate of the nozzle?

How much pressure should be reached in the air compressor?

There is no shortcut to adjusting these details.

It is even more impossible to overtake on a curve.

The same goes for this: the paint workshop looks very simple, it is nothing more than a large oven and several large industrial fans.

However, for paint surfaces with different thicknesses, what kind of drying temperature should be used to prevent the paint from flowing or bursting?

Different solid wood materials also require different drying temperatures.

For different woods, they need different moisture contents for use in different regions.

Only in this way can the combined furniture be allowed to enter the customer's house.

The furniture frame, door, and the joints between the furniture will not crack.

There will be no offset in size.

And other people's furniture factories have no such awareness at all.

In order to keep the furniture door and frame from not having too serious deviations, other furniture factories use a stupid method: thicken the wood of the board and frame.

Once thicker, the degree of deformation of the furniture will not be too serious.

After the customer bought it back, he could use it as much as possible, so he didn't dare to be so particular.

But now the times are different.

The pockets of the general public have become much more abundant.

Now it is not like before, when it was purely a period of commodity shortage.

It's good to buy things, but there's no choice for everyone.

Now people have a higher pursuit of the quality of products.

If you use the silly, thick and black products that used to fool them, this method will no longer work.

therefore,

The spray painting and baking painting workshop of Tianjing Shixing Furniture Factory seems simple, but in fact, if you want to do it well, the technical content is quite high.

The one with a higher technical content in Tianjing Shixing Furniture Factory must be considered as paint adjustment technology.

Only when adjusting the paint, workers can maintain a consistent ratio to make the surface of the furniture evenly color.

This is equivalent to later generations. Once the paint surface of luxury cars is damaged, they must return to the original factory to make the same paint surface.

Although the rigor requirements of the two vary greatly, the principles are the same.

Tianjing Fashion Furniture Factory has a complete set of process flows:

Under what temperature conditions, how many grams should be added to the paint have strict data control.

Unlike other furniture factories, they rely solely on the experience of old workers.

Their paint mixing is equivalent to cooking in Chinese cuisine.

A little salt, a spoonful of vinegar, three star anise trees, and appropriate amount of bean paste...

But the problem is that the spoon used to measure vinegar is big or small; a little salt, how much is it?

How can I call it an appropriate amount of bean paste?

When to add which seasoning to achieve the best effect?

This makes it very difficult to operate.

Moreover, in this period, the old workers still retained the traditional feudal thoughts of old artists.

——Technically, I always like to keep a hand.

But Tianjing Shixing Furniture Factory is different.

In this factory, every process flow is purely done with landline data to control the quality of the product.

Therefore, these technologies of spraying, baking and placing paint are the core technologies of Tianjing Fashion Furniture Factory.

As early as when Jian Teng was working in a cosmetics factory, he had already started experimenting with these things.

But now,

Luo Xuan was actually preparing to teach these technologies to other furniture factories!

Isn’t this equivalent to digging a grave by yourself?

Leader Wei is not unintentional, nor is he the kind of person who has no view of the overall situation.

But when he heard about Luo Xuan's proposal, he also began to frown: "Comrade Luo Xuan, let me first talk about your real intention of this move.

Only when you make the words clear and let all the leaders here know it, can everyone be willing to provide strong support to your commune's furniture factory."

Facing the inquiry from leader Wei, Luo Xuan did not dare to hide it.

I had to honestly reply: "Leaders, the furniture market... is very big! It's beyond all of us."

The world outside is vast.

The entire furniture industry is a major industry with a total of up to trillions of dollars in the world.

Since there is so much market share, a Kaitian Jingshi Furniture Factory is expected to have sales of only one million yuan a year.

That's the case.

Why do you want brothers to fall in love with the wall? Why do you need to roll them inside?

Even in the entire Tuocheng area, everyone comes to produce furniture, thus forming an economies of scale.

even so,

Compared with the overall output value, it is just a drop in the ocean in the face of total sales.

As long as everyone is brave enough to innovate and invest, they can create their own flagship products.

Why worry about not having sales?

If you want to become bigger and stronger, you can set up checkpoints on the road to reject competition from others.

That certainly won't work.

If you want to become stronger and bigger, you can only advance bravely and catch up.

What competition are you afraid of?!

mustached

()
Chapter completed!