Wang Buxu suddenly felt as if he was a scientist who had been delayed by the throne.

Even if your hands-on ability is not good, you can rely on your own ideas and vision.

Even if you don't rebel after traveling back in time, you can still do well just by doing scientific research.

Of course, nothing in this world can be repeated.

so……

Now that we have the idea, all that remains is to find ways to improve the process and increase the yield.

This matter can be said to be big or small.

Rounding it off a bit, it’s actually a mold problem.

Yes, it's the mold.

Although this scope is very broad, it can be called a device or a mold.

In any case, Wang Buxian couldn't solve the problem of unstable power output of the steam engine for a while, but he had ways to improve the artificial problems.

Wang Buxu pointed directly at the operating table and said: "Add a fixed device here and here respectively, and use a screw device to move..."

Wang Buxu Balabala's explanation lasted a long time. Some people understood and some didn't.

But Wang Bu Hungry made the principle clear.

This thing was very common in later generations, but it was mostly used on manual lathes.

The two wheels control the longitudinal and transverse movement of the milling cutter respectively.

Longitudinal movement needs to be fixed, and it cannot fall out of position during use.

At the same time, workers cannot always control the problem with their hands. In the end, it will still be solved by manpower, which cannot achieve an ideal state.

Therefore, the device that controls longitudinal movement must be fixed after the position is determined. Unless it is moved manually, it must not move.

On this basis, humans only need to control the horizontally moving turntable, and adjust the movement speed by controlling hand speed.

In this way, all the workers need to learn is the movement speed, and they no longer need to master the control of force.

One subject is missing, but this subject is the most difficult to learn and cannot be taught.

"This is not difficult. We have this kind of technology. After determining the position, it can be fixed vertically by twisting it!" Yue Shan understood what Wang Buxian meant and quickly thought of a technology that could be used here.

.

Although he does not produce many parts, as a general assembly workshop and general design workshop, he has the most comprehensive technology.

No one knows better than him where something can be used.

And looking at the equipment in front of him, Yue Shan felt that it had great development potential and could be used in many places.

"Your Majesty, if this problem can be solved, it will indeed be of great help in improving the yield rate. However, I have another idea. If we also use the assembly line, will the yield rate be higher?" Cheng

Ju said seriously.

Since Yue Shan said that he had the technology to solve the problem raised by Wang Buxu, Cheng Ju was too lazy to think about it anymore.

Therefore, we focused on how to improve the yield rate.

After all, if this problem is not solved, there will be no way to produce it on a large scale.

And a finished product requires scrapping dozens of materials. This approach is too luxurious and a big man cannot afford it.

Now, although the big man seems to be prosperous, in fact he is still very frugal in every aspect.

Take theirs as an example, all scrap materials must be smelted and used, although there is also loss during the smelting process.

But this loss is acceptable, and it is better than throwing it away without using it.

The scraps left after processing by this lathe are either iron powder or very thin wire. Nothing can be done with this material, so it must be thrown away or smelted.

The cost is not considered at all now. Only when the raw materials are sufficient will the cost issue be considered.

"Okay!" Wang Buxian understood Cheng Ju's thoughts instantly.

This is indeed a good idea.

The biggest advantage of the assembly line is that it weakens the importance of each link.

At the same time, every link must be very standard.

If a craftsman wants to become a master, he must be able to create a finished product from a raw material, which is not only beautiful, but also durable and ingenious.

But since Dahan popularized the assembly line, the training for workers has become simpler.

Even if ordinary people with no education receive ten days and half a month of training, they will be almost the same after half a month of actual combat training.

Even those with poor understanding can still complete their job well within two or three months.

In the past, a dragon was needed, but now it is no longer needed.

I only do one thing, and I keep repeating this thing every day. It's very boring, very boring, and very unskilled.

And the number of people who need to use it has also increased, although it seems that the cost has increased.

But in fact, the output has increased several times. According to the original model, these people would not be able to produce so much output in the same time.

Of course, Wang Buxu had another idea.

"Since we are using an assembly line, we might as well simplify the process and simply eliminate the use of the longitudinal axis. Of course, we still have to have something that should be there. After all, it is impossible to only produce things of this specification. During the production process, directly use the

Their respective vertical positions are fixed, and they only need to control the lateral movement." Wang Buxu said directly.

"Only do the first round in the first link, the second round in the second link, and in-depth processing in the third link. If you need to do it a few times, just set up a few links. If too many times are needed, then simply do it.

On the first day, the entire workshop will work on one standard, and on the second day, it will be divided into several days to work on the complete set of standards. When grooves need to be made later, the same method will be used."

Cheng Ju nodded secretly and wrote down what Wang Buxu told him.

This is indeed a method, and it is also a method that can improve efficiency and save equipment.

If it were really produced, each one would have to be turned on the machine almost ten times. If it was an assembly line, ten lathes would be used to do the initial processing of one piston.

This cost is too high. It is better to have ten lathes doing the same thing every day. In this way, as long as we can enter the normal production process, the efficiency will not be affected, but it will be easier to control the quality.

However, Wang Buxian's vision goes beyond this. What are the advantages and disadvantages of lathes?

People who don’t understand must think that aren’t they all lathes?

Or you simply think that other people’s technology is good, but it’s hard to say what makes it good.

Simply put, processing different parts requires different rotation speeds. The faster the rotation speed, the higher the efficiency and the smaller the traces left.

But it also needs to be matched with the cutter head. Apart from the rotation speed, the rest is the cutter head.

In later generations, the speed is not a problem, but the cutter head is a water diversion channel, and there are also some control systems.
Chapter completed!