Chen Yang is not a fool. He is afraid of the terrifying punishment imposed by his right hand, but it does not mean that he can easily believe the explanation of his right hand.

He was half-believing and half-doubted about the four morphological components mentioned by the right hand, and he was reserved without daring to completely deny it.

However, after being parasitized by his right hand, his personal position has changed a lot. If he had met foreign civilization races before, of course, he should be on the side of human beings. However, after being parasitized, life and death cannot be controlled by him, or in other words, in order to avoid the terrifying pain and to survive, he had to obey every command of his right hand.

At least now, before you understand the specific information of your right hand and your weaknesses, Chen Yang must be a hero in the world and be honest and be a "friendly" earthling.

As a computer-aided technology, CAD can be said to save people a lot of time to draw and save a lot of energy. However, no matter how time is saved, it is impossible to complete a relatively complex drawing in more than a minute.

After completing the drawing, the right hand did not stop, but opened the 3DSmax three-dimensional animation drawing software to quickly render and build a three-dimensional model like a real object at the speed of Chen Yang's breathing air.

I believe that many professionals can cry in shame when they see the 3DSmax three-dimensional animation drawing software.

However, as a non-professional, Chen Yang certainly would not feel ashamed. In fact, he was even more surprised at this three-dimensional model that was rendered and constructed.

That's a gun!

A gun I've never seen before!

For modern people, even if they have never touched the gun with their own hands, they have seen many of them through TV networks on weekdays and must have some understanding of the appearance of the gun. Chen Yang is definitely not a military fan, but despite this, he also thinks that this gun is very strange and is definitely not a weapon used by modern countries.

To give an accurate description, although the appearance and light and shadow effects of this gun are rendered very realistically, they give Chen Yang a very fake feeling, just like a spaceship in an American blockbuster. Although the special effects are very real, they also give people an unreal feeling, because everyone knows clearly that this thing does not exist in reality.

Therefore, everyone thinks that the spaceship in the movie is fake.

At this time, Chen Yang seemed to be looking at a science fiction illustration, wondering about the gun on the screen that looked like a weapon in the future. Could it be that the weapon to be made with the right hand is this gun?

Chen Yang shook his head, very suspicious.

It’s not that he thinks this gun does not exist. Since all foreign civilizations and alien creatures have appeared, what’s impossible? But to say that using that pile of "garbage", well, it sounds nicer. Using ordinary hardware materials to make such a cool weapon, do you think this is playing a game?

"You should be able to understand these, right?"

Stop the control mouse with your right hand and point to CAD and other data on the monitor screen.

"That's fine."

Chen Yang hesitated a little and said carefully: "But Screw Master, we don't have machine tools and other special equipment, so we can't even complete the appearance."

"You don't have to worry about this. I have my own way to deal with machine tools and parts."

He pointed to the screen with his right hand and said, "Do you know what weapon this is? According to humans, this weapon is called an electromagnetic cannon."

"Electromagnetic gun?"

Chen Yang's face changed drastically. He never thought that this sci-fi-like future weapon was actually an electromagnetic cannon.

Electromagnetic cannon - an advanced kinetic energy killing weapon made using electromagnetic emission technology. Compared with traditional weapons that use gunpowder gas pressure, the projectiles of the electromagnetic cannon have doubled their speed and power, and are extremely terrifying.

According to Chen Yang, electromagnetic gun technology is highly valued internationally. I remember that the US military also tested the electromagnetic gun on a ship last year, and countries are very concerned about it.

But the existing electromagnetic guns are very large in size. Is such a small electromagnetic gun of any power?

"As for the machine tools and parts issues you are concerned about..."

The right hand extended out, and I don’t know where the cylinder was touched. The flat cylinder suddenly changed and immediately cracked from it and divided into two sections.

But the change did not end there. When the two tentacles were separated with their right hand, they grabbed one end of the cylinder and removed it from both sides, the cylinders split into two sections were placed on the edge of a table.

What are you planning to do?

Chen Yang looked quietly, his eyes full of curiosity. This is the equipment of the creatures outside the sky. If you can see the leopard from the inside, you may be able to discover the technical level of the creatures outside the sky.

The surface of one end of the cylinder originally had a silver-colored smooth appearance, but after the change, many luminous blue words appeared on the surface. The tentacles turned into by the right hand kept clicking on it, which seemed to be operating.

After tapping for a while, Chen Yang held his breath and watched nervously, he didn't even know that sweat was flowing from his forehead.

The one-minute operation time was very short. One of the tentacles in the right hand grabbed an aluminum alloy raw material in the box, placed it out of thin air in the air where two cylinders confronted each other, and then released the tentacles.

The next scene left Chen Yang stunned.

His eyesight was not bad, and he could see clearly. There was nothing between the two separate cylinders, and nothing was left.

However, in such an empty place, after losing the involvement of the tentacles, the aluminum alloy that should have fallen to the ground actually floated in the air as if there were invisible support points.

Is this a magic trick?

With Chen Yang's pitiful brain capacity, he couldn't imagine the principle here, or if he had to look at other professionals, he was afraid he couldn't say anything.

But this did not prevent Chen Yang from respecting his right hand.

The technical level of seeing is real made Chen Yang understand that the science and technology on his right hand must be more powerful than humans.

However, Chen Yang knew the next moment. Although he had some mental preparation, he underestimated the technical level represented by his right hand.

The aluminum alloy suspended in the air suddenly began to turn red, and no heat source was seen. The raw material of the aluminum alloy suddenly melted and turned into a mass of aluminum alloy high-temperature solution, rolling and suspending in the air.

"What's going on?"

Chen Yang couldn't help but shout, and he was even a little shocked. If he remembered correctly, the melting point range of the aluminum alloy is around 475 degrees Celsius to 635 degrees Celsius, how could it melt all at once?

He looked at his right hand in confusion, expecting his right hand to explain.

After he expressed his absolute obedience to the order, his right hand was much better than before, and said coldly: "This is using application technologies such as high-frequency alternating magnetic fields, but in a short time, the metal molecules move at a high speed and irregular movement, allowing the metal to heat and melt itself in the shortest speed."

With just one short explanation, Chen Yang suddenly realized, but his explanation of the right hand actually became even more fearful and afraid. Speaking of which, the technical principles are not complicated, but if such technology is applied to the inside of the cylinder, its technical level is very terrifying.

Not to mention, in the following view, the pile of aluminum alloy liquid was adjusted out of thin air by invisible binding force, and then lowered the temperature, forcing the aluminum alloy liquid to stabilize after the adjustment of the shape. A part that required a machine tool to polish for a long time was actually produced so simply.

There are various inevitable disadvantages in the smelting process of aluminum alloy. For example, aluminum liquid can easily absorb moisture and oxygen from the atmosphere, and after being cast, it will produce pores and shrinkage holes. Castings that are accidentally released will be scrapped.

But Chen Yang saw that the parts produced by his right hand looked perfect, smooth and beautiful, like a work of art, and there were absolutely no problems above. This was really amazing. Adjust the accuracy and geometric shape at will, then cool it quickly, and finally eliminate defects such as loose casting of the material. Parts with a nano-level accuracy can be produced in just a few seconds, which is really too **.
Chapter completed!